Dual Console Mount

• Custom console panel mount designed to properly fit your boat brand/model and electronics units.
• Designed to provide the ultimate mounting security for today's marine electronics.
• Constructed of high-grade aluminum with a powder coated finish and all stainless steel hardware.
• Designed with our state of the art 3D CAD software and manufactured on site at Boatlogix.
• Constructed with a base flange that bolts to the boat to provide a secure connection.
• The panel plate bolts to the base flange and the adjustable support assembly connects to the panel plate.
  
• The completed assembly is secured to the boat with stainless steel bolts, washers, and Nylon locking nuts. No screws to loosen or strip out.
  
• The dual mount top support bar is supported and connected to the panel plate with an adjustable support assembly.
• The gimbal brackets (not included) are installed to set the angle of the two screens in relation to each other.
• Units can be set in the first hole location and the viewing screens will be parallel, no angle inward.
• Units can be set in the second hole location and the viewing screens will be set at a 10 degree angle inward.
• Units can be set in the third hole location and the viewing screens will be set at a 20 degree angle inward.
• The wire way provides a large opening to allow for multiple cables to easily pass through the panel plate to the units.
• The wire way is covered by a rubber and aluminum cover with a powder coat finish.
• Sealing gaskets are provided for installation between the boat console and the base flange and between the base flange and the panel plate to seal these areas.
• Panel plate edges beveled after painting for an added touch.
• Patent Pending
  

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.